Hi,
i was running in so much troubles after installing Version 3 of Birdiesync that i am despairing !
Equipment info : Windows 7 Professional 64bit (german) running on a i7 system, 16 GB Ram, Thunderbird 38.3.0 german, Birdiesync 3.0.0.1, LG P710 with Android 4.4.2, Samsung Note 10.1 with Android 4.1.2. Computer connected to lan with gb, mobiles via Wlan
What happens : after upgrading to Thunderbird 38.3.0 and Birdiesync 3 things become strange.
- Starting Thunderbird for the first time, everything is ok, closing / restarting TB hangs with the message "Überprüfe den Funktionsumfang des Servers <mail-serverY> ". Need to restart the computer to start TB again. This only happens if Birdiesysnc is installed. After deinstalling Birdiesync TB works like a charme, no problems at all. I have triied several times and always i can reproduce this error
- Connecting from Mobile Phone sometimes work, sometimes not. A reboot of both the computer and the mobiles helps most of the time. After connecting, the sync is extremely slow and sometimes aborts with "Source disconnected.
I was using TB and Birdiesync 2.x for about 2 yrs without any problems, infrastructure (Lan / Wlan) has not changed.
Thank you in advance for any help.
Regards
Reinhard
Please Help, version 3 makes me crazy <solved>
Please Help, version 3 makes me crazy <solved>
Last edited by mud_diver on Mon Nov 30, 2015 11:31 pm, edited 1 time in total.
Re: Please Help, version 3 makes me crazy
Hello Reinhard,
If via USB, did you try to disable or enable USB debugging ?
Do you have one or several screens on your PC ?
Which source disconnects ?
After such a disconnection, could you reconnect the source (this is important to get its logs) (you may stop the synchronization if it is automatically launched again), then build a log archive with menu "Tools/Archive logs..." and send BirdieSyncLog.zip to support(at)birdiesync.com ?
Thanks.
I may need to send you a new test version to investigate on this.restarting TB hangs with the message "Überprüfe den Funktionsumfang des Servers <mail-serverY> "
Do you connect via USB or via Wi-Fi ?Connecting from Mobile Phone sometimes work, sometimes not. A reboot of both the computer and the mobiles helps most of the time.
If via USB, did you try to disable or enable USB debugging ?
Do you have one or several screens on your PC ?
Which part of the synchronization is slow and on which source ? (you may check the status evolutions when "Synchronization" view is selected in BirdieSync server)After connecting, the sync is extremely slow and sometimes aborts with "Source disconnected.
Which source disconnects ?
After such a disconnection, could you reconnect the source (this is important to get its logs) (you may stop the synchronization if it is automatically launched again), then build a log archive with menu "Tools/Archive logs..." and send BirdieSyncLog.zip to support(at)birdiesync.com ?
Thanks.
Birdy
Re: Please Help, version 3 makes me crazy
Hi Birdy,
thank you for the fast replay.
Hope,this helps.
Thank you in advance
Reinhard
thank you for the fast replay.
No ProblemI may need to send you a new test version to investigate on this.
Connection is done via WiFi, the BirdieSync Server has fixed IP, mobiles via DHCP.Do you connect via USB or via Wi-Fi ?
Hmm, not sure what you mean with several screens. At the time of sync there are the usual tasks running like Kaspersky AV, Wacom Utility, ... Windows open are Thunderbird and BirdieSync.Do you have one or several screens on your PC ?
Hmmm, the part of "listing events" lasts about 1-2 minutes, then after short it switches to "prepairing synchronization" for about another minute, after that the "real" sync is fast.Which part of the synchronization is slow and on which source ? (you may check the status evolutions when "Synchronization" view is selected in BirdieSync server)
I do the sync one by one, and the disconnect occurs on the smartphone as well on the tablet. A quick view on my router does not show a disconnection of the mobiles.Which source disconnects ?
Sorry, today i was not able to reconnect. Immediate after trying to (re)connect it claims no connection to host ..... . Basically, trying to connect to my NAS or www works after the disconnection. If a reconnect will work i will send a log.After such a disconnection, could you reconnect the source
Hope,this helps.
Thank you in advance
Reinhard
Re: Please Help, version 3 makes me crazy <solved>
Hi,
after a lot of help from Birdy - thank you very much for your outstanding support - the problem was identified and solved. Removing and reinstalling the latest drivers from my WACOM Tablet did the job - everything now works like a charme.
Kind Regards
Reinhard
after a lot of help from Birdy - thank you very much for your outstanding support - the problem was identified and solved. Removing and reinstalling the latest drivers from my WACOM Tablet did the job - everything now works like a charme.
Kind Regards
Reinhard